Permashine
Polished Concrete System
The FGS Permashine Concrete Polishing System transforms ordinary concrete surfaces into exceptionally durable, attractive, colorful floors.
Product Characteristics
- Will not trap free, migrating floor moisture as do thin film coatings.
- Green spec listed and qualifies for LEED projects.
- Resists abrasion, micro-pitting, oil contamination and water penetration.
- Suitable for use in customer occupied areas.
- Leaves no film to scratch, chip,peel, discolor.
- Non slip texture.
- Increase floor reflectivity, helping to reduce facility lighting and energy needs.
- Substantial savings in annual maintenance costs over wax coatings.
SEAL HARD
Chemical Liquid Hardener
Seal Hard is a chemical hardener that seals, densifies, harden and waterproofs concrete floors, adding many years of useful life to a floor.
Product Characteristics
- Seal Hard increase the wear surface strength of concrete floors.
- Seal Hard penetrates concrete surface to seal, densify, harden and not peel off.
- Seal Hard is guaranteed to resist dusting for years after application.
- Seal Hard waterproof concrete floors.
- Resists abrasion, micro-pitting, oil contamination and water penetration.
- Easy-to-use, odorless formula is suitable for use in employee/customer occupied areas.
- Leaves no film to scratch, chip, peel or otherwise deteriorate.
- Treated floors retain the non-slip texture of concrete.
- Seal Hard floors cost less.
- Substantial savings in annual maintenance costs over conventional wax coatings.
PRIMEBASE
Polymer Mortar System
A resin acrylic polymer mortar which contains a special binder mixed cement, fine mineral aggregate and quartz sand.
Product Characteristics
- Extremely hard wearing and high impact resistance.
- Non dusting.
- Slip resistance.
- Withstand low temperature and thermal shock.
- Very suitable for old existing concrete floor.
- Very high abrasion resistance.
- User friendly and non dusting floor.
- Very economical.
flashfloor
Polymer Mortar System
A heavy duty resin screed mortar composed with pigmented emulsion polymer mortar filled with fine mineral aggregate and silica sand.
Product Characteristics
- High impact resistance.
- Extremely hard wearing.
- Slip resistance.
- Very suitable for wet areas and old existing concrete floor.
- Very high abrasion resistance.
- User friendly and non dusting floor.
- Food grade.
Superflat
Superflat Flooring System
Superflat floor are required where very narrow aisle trucks are employed to place and pick goods stacked to heights over 12-13m, where the path of the truck is fixed and the truck is floor supported.
Product Characteristics
- Higher efficiency of truck operation.
- Loads can be lifted and stored higher.
- Beneficial to racking installation.
- Reduce forklift maintenance.
- Reduce floor maintenance.
- Clean and dust free.
- Safe to operate.
